Bill of Materials
Hardware
This is hardware that is required to modify the printer, all prices are in AUD, for british pounds, just divide the value by 2
| Part | Quantity | Option | Price |
| Skr Pico | 1 | - | $40 |
| BTT Microprobe | 1 | Without Bracket | $24 |
| Btt SFS V2 | 1 | - | $15 |
| Insulated Wires, 50M | 1 | 22 AWG, 5 Colours | $12 |
| Jst XH Crimping Set | 1 | With or without crimping tool | $6 |
| 500g Filament Spool For Parts | 1 | PETG or ABS | $25 |
| TOTAL | Ever evolving, do the maths yourself |
Optional Hardware
| Part | Quantity | Option | Price |
| MellowFly HDMI7 | Optional | Screen | $51 |
| CYD klipper screen | Optional | Allows stock bambu a1 esk screen with custom design. | $20 |
| SSR for Heated bed | Optional | Basically required, but hasn't been added to my build yet. | $25 |
| 14AWG Insulated Wire | Optional | Thick wiring for mains voltage and amperage. | $10 |
| ADXL345 Acellerometer | Optional | Allows Input shaping, this is a must for high speed with quality. | $6 |
Equipment
This is equipment that you might have laying around, these items aren't project specific but are needed.
| Name | Use | Price |
| Soldering Iron | Soldering wires together | $20 |
| Heat shrink tubing 4-5mmD | Enclosing joint wires to prevent short circut vc vg | $5 |
| Thin pliers | To crimp JST XH without crimping tool | $5 |
| Wire Stripper | Help to strip wires, scissors can work aswell. | $5 |
| Zip Ties | Cable Management | $2 |
| Hex screwdriver M1.5, M2.0 | Comes with a1 printer, for dissasembly. | $2 |